In PE/PP Testing v1 the layer height was set between 5 – 8 mm, resulting in thick round layers. The material has less surface for cooling...

ECO-oh! supplied us with recycled PE/PP blend made of recycled household waste! With the material consisting of 75% PE & 25% PP it is...

To vertically hold the extruder in place a standard was built. This enables to attach the extruder to the robot more easily. After...

While printing with recycled PLA we experienced considerable expansion and shrinkage of material. Since PLA is an amorphous plastic it...

With a different motor on the feeder and a custom made connector we managed a constant flow of plastic throughout the extruder. Next up,...

The motor driven feeder arrived to tackle our feeding problems. Unfortunately, the included motor seems not suitable for integration...

We have managed to hook our extruder up to our robot. Thanks to Rohaco for their support. Now we realise that the material feeder wont...

Many people have been working on the same problem: What is the easiest way to slice CAD to GCode or Rapid? In order to solve this, a...

Mechanical and software engineering interns have started working on the ReMake Plastic project. Their focus is the development and...

The upgrade of the extruder has been finalized. Big thanks to Rohaco! The extruder set-up is now separated from the controlling unit,...

A hackathon was organized by ReMake partners for CAD to RAPID. Too many people are working on the same problem. The goals of this...

ReMake Plastics is now actively engaging in the Precious Plastic community. The workspace of ReMake can be found on the map and updates...

ReMake is meeting up with Joost Slagter from the Recycle University; an enthusiastic plastic foundation in Amersfoort. Their mission is...

Thanks to Auke de Vor for his excellent design.

The initial plastic research, as part of the subsidy trajectory, is rounded up. We concluded on the type of plastics that are going to be...

As a partner in the ReMake consortium ECO-oh! contributes with their expertise on plastic recycling and recycled materials. To get...

Today it was announced that ReMake plastic is awarded subsidy by the municipality of Amersfoort! ReMake Plastics aims to process recycled...

The first tests with the extruder are executed. All is working well, however there is still a lot of work to do before the extruder can...

Very excited moment that kicks-off the plastic journey. This is where it all started with the arrival of the extruder. We had a plan to...