Here are the results of the first tests with new recycled PP material from Eco-Oh! We are glad to have found we made the right decision by switching material...

By adding simple isolation around the nozzle we managed to increase the nozzle temperature from 60 up to 170 degree. Definitely one of the most simple upgrad...

After many months of developing and testing to master the PE/PP material from household waste, our gathered data indicate that we will not be able to produce...

Since the extruders end had an unusual external thread size for attaching nozzles, we decided to remove the end and replace it with a more common fitting. Th...

Earlier we announced a large upgrade of the extruder. One major challenge was to increase the amount of heating zones from 2 to 4. Splitting the zones was ne...

We found this interesting research on the relation of extruder screw geometries, melt viscosity and thermal efficiency. Highlights: • Radial melt temperature...

With the installment of couplers and nozzles the quality of the output greatly improved. Since recycled plastics from household waste are used we are excited...

In PE/PP Testing v1 the layer height was set between 5 – 8 mm, resulting in thick round layers. The material has less surface for cooling and remains longer ...

ECO-oh! supplied us with recycled PE/PP blend made of recycled household waste! With the material consisting of 75% PE & 25% PP it is challenging to find the...

While printing with recycled PLA we experienced considerable expansion and shrinkage of material. Since PLA is an amorphous plastic it shown behavior is to f...

We have managed to hook our extruder up to our robot. Thanks to Rohaco for their support. Now we realise that the material feeder wont work at that angle. Va...

Many people have been working on the same problem: What is the easiest way to slice CAD to GCode or Rapid? In order to solve this, a rhino + grasshopper Hack...

A hackathon was organized by ReMake partners for CAD to RAPID. Too many people are working on the same problem. The goals of this hackaton is to create a bes...

ReMake Plastics is now actively engaging in the Precious Plastic community. The workspace of ReMake can be found on the map and updates will be shared on the...

We want to make our efforts in plastic recycling open source. Check out these posts where we share our what we have learned.

Today it was announced that ReMake plastic is awarded subsidy by the municipality of Amersfoort! ReMake Plastics aims to process recycled plastic waste into ...